Kitchen cleaning and decontamination tips and the advantages of stainless steel countertops

The kitchen is a place with a lot of oil smoke, and everyone should know that even stainless steel kitchen utensils and equipment are bound to rust. How should we deal with this situation? 1. Reinforcement support All work surfaces, work surfaces, drain plates, dishwashing stone surfaces, etc. need to be installed with reinforcement support. The thickness of the reinforcement support should be at least 2mm and the material should be made of stainless steel. 2. Screws for leveling the bottom of the feet All foot tubes should be installed with stainless steel spring-shaped bottom leveling screws. The bottom screws need to be tightly connected with the foot tubes. After the workbench is leveled, the screws should have a locking device. 3. Bottom plate a) When there is a bottom plate under the cabinet, the bottom plate should be 38mm high, 12mm folded, and become a groove shape. The four corners should be cut to match the foot tubes. A 28mm*100mm*25mm stainless steel groove reinforcement support is installed under the bottom plate. b) The movable bottom plate is made of the same material as the fixed layer plate, with 4 sides 38mm high, 12mm folded edges, and grooved. The 4 sides also need to be cut to match the leg tubes. Each section of the movable layer plate cannot exceed 800mm, and each section of the layer plate needs to be reinforced. 4. Unless otherwise specified, all support leg tubes should be made of stainless steel not less than 38mm. 5. Unless otherwise specified, all leg tube brackets should be made of 25mm diameter * 1mm thick stainless steel. The horizontal bracket is perpendicular to the main leg tube and remains horizontal. Unless otherwise specified, the leg tube bracket is safely welded and polished 180mm from the ground. 6. To prevent oxidation corrosion after welding, stainless steel must be treated with anti-rust. The surface of the weld surface needs to be polished to prevent corrosion. After the bottom is properly polished, apply a metallic anti-rust paint. When welding a galvanized frame, it should be welded before the frame is galvanized. If a galvanized frame needs to be welded, a metallic anti-rust paint should be applied after welding. Keywords: school canteen kitchenware, canteen stainless steel kitchen equipment, school kitchen renovation project, Guangzhou kitchenware factory.