Selection criteria for kitchen appliances based on hygiene, fire protection and convenience

Stainless steel sinks first appeared in Europe and the United States, and Chinese stainless steel sinks first appeared in Taiwan. In the early 1990s, Taiwanese businessmen introduced stainless steel sinks when they invested in the mainland to build factories. In the early days, there were Mantangchun sinks, and in the later days, there were Molin sinks. How to identify the quality of good stainless steel sinks for environmentally friendly kitchen equipment? 1. The thickness of the sink steel plate: high-quality sinks use imported 304 stainless steel plates with a thickness of 1mm, while ordinary low-end sinks use 0.5mm-0.7mm. The method of identification can be distinguished from the weight and whether the surface is flat. 2. Anti-noise treatment: The bottom of a high-quality sink is sprayed or glued with rubber sheets and does not fall off, which can reduce the noise caused by the impact of the faucet water on the bottom of the basin and play a buffering role. 3. Surface treatment: The surface of a high-quality sink is flat, the luster is soft visually, it is not easy to stick to oil stains, it is easy to clean, and it is wear-resistant. 4. Inner corner treatment: The inner corners of a high-quality sink are close to 90 degrees, the vision inside the sink is larger, and the basin volume is larger. 5. Supporting parts: high-quality water heads require thick walls, smooth processing, no water leakage when the cage is closed, durable and comfortable touch beads. Downpipes are required to be made of environmentally friendly disposable materials, easy to install, odor-proof, heat-resistant, aging-resistant and durable. 6. Sink molding process: One-piece molding technology solves the leakage problem caused by the welding of the basin body, which causes the weld to be unable to withstand the corrosion of various chemical liquids (such as detergents, stainless steel cleaners, etc.). The one-piece molding process is a particularly important process, which has high requirements for the steel plate material. What kind of process is used is an obvious reflection of the quality of the sink.